Your lower cost solution to a high cost problem.

Alarm Programming for Saab 900

Our Price: $150.00 (after $50 core refund)
Call us to place an order.

  • No need for expensive programming equipment.
  • As soon as we receive your payment, we will send you a pre-programmed, disarmed module.
  • Install our module, start the vehicle, and mail your old module to us for your $50 refund.
  • 24 hour turn around
  • USPS Priority shipping included in the price.

Alarm Module Removal Instructions

Mechanical Skill Level Required: Minimal
Additional Professional Programming Required: None. Plug and Drive.

Tools needed to remove the alarm module:

  • 10mm Wrench (a ratcheting wrench is easiest)
  • Flat Blade Screwdriver (for removal of door sill trim)

Let's Begin

  1. Remove driver's door sill trim with the flat blade screwdriver.
    The trim is located at the bottom of the door frame between the carpet and the metal.
  2. Lift the carpet away from the floor at the driver's door sill right next to the driver's seat. At this point the alarm module should be visible.
    It is a silver box with a yellow connector.
  3. Remove the 2 plastic 10mm nuts.
  4. Lift the alarm module out and disconnect from the connector